Copper rivet setter12/8/2023 ![]() Projects: Can be used for almost anything. Projects: Saddles, thick gun holsters, and knife sheaths. Projects: Thick/heavy-duty bags, cases, etc. for rapid and double cap rivets.įor copper rivets determine based on post size. Projects: Bag handles, tool holders, wallets, and knife sheaths. Projects: Lighter-weight leather projects such as tote bags, clothing, watch bands, thin belts, or bracelets. Looking for the best leather rivet for a specific project? Here’s a rundown of the most common leather rivet post sizes and what they’re best used for: Post/Rivet Sizeįor leather up to about 7 oz. If you cannot get the rivet apart, reset the cap with a hammer and attempt the drill press again.If not, you may need to push the rivet out with a nail or place a screwdriver under the cap and gently try to pry the rivet apart. In some cases, the rivet will easily come apart. Wait for the rivet to cool before handling, and be wary of any sharp bits of metal.At a slow speed, lower the drill onto the rivet – do not press down hard.For double caps, you will need to drill through the cap. Choose a drill bit that is a tiny bit larger than the hole on the post side.Place the piece on the press with the cap facing down.In most cases, the use of a drill press is the easiest way to remove an old leather rivet. If you prefer a flat and slightly stronger rivet, hammer the domed top flat using a hammer.Set the domed part of the copper rivet setter over your rivet and burr and hammer down to create a smooth surface and remove any sharp edges from trimming.Trim the post if necessary, using diagonal cutting nippers. ![]()
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |